Innovative Allmand Products

Allmand Eclipse Message Board

                              

 

ALLMAND MESSAGE BOARD SPECIFICATIONS
 

Allmand Message Board offers:
the ideal solution for any temporary signage need.  From road construction to commercial advertising to special events, the easy-to-move and easy-to-program message board allows you to customize your message to meet any need.
   
DIMENSIONS
Message panel:   48" x 96" (1.22m x 2.44m)
Length (frame):   101" (2.56m)
Overall length:   110" (2.79m)

Trailer width, including fenders:
68" (1.73m)

Overall sign width:   96" (2.44m)

Height to bottom of sign when raised:  
85" (2.16m)

Overall height:
  Sign raised:   135" (3.43m)
  Sign lowered:   95" (2.41m)

Jack stand foot print:  
69.5"L x 56.5"W (1.77m x 1.44m)

Total weight withfour (4) type 8D batteries: 1,400 Ibs. (630Kg)
 
ELECTRONIC CONTROLLER
Hand-held terminal interfaces with Message Board computer


Environmentally sealed terminal with touch pad and 4 x 20 character display
Display controls located on controller face panel

Lockable hinged cover

Low-voltage indicator

Photocell located on bottom of sign to automatically control lamp intensity appropriate to ambient conditions

Double-wall rotational molded polyethylene fenders

   
SOLAR PANELS
High-efficiency, single crystal

150-watt solar array with anodized aluminum frame standard

25-year output warranty
 
  BATTERIES
Four 8D 12-volt heavy-duty, commercial marine deep-cycle batteries
   
MESSAGE PANEL
6 to 12 BRICK® display modules

BRICK® size 19 in. x 14 in., 96 pixels per BRICK®, four LEDs per pixel

BRICK® facing is constructed from high-impact, UV protected, ABS thermoplastic polycarbonate. BRICKs® are UV-protected in the face and have silk-screened acrylic in the mask.

Photocell located on bottom of sign to automatically control lamp intensity appropriate to ambient conditions

Red low-voltage "drive by" warning indicator





 
  TRAILER
10-gauge, all-steel construction

13" (33.01cm) tires and spoke wheels

Four slide levelers with screw jack on tongue

Double-wall rotational molded polyethylene fenders

Hinged door for accessory storage compartment

Straight, removable drawbar

Adjustable height, reversible combination 2" (5.08cm) ball, 3" (7.62cm) pintle hitch

Safety chains

Stop, turn and tail lights

High-visibility safety orange

   
MESSAGE PANEL OPTIONS

BRICK® configurations of:


6 x 2 vertical (MB6200) with a 38 in. x 84 in. display area

5 x 2 vertical (MB5200) with a 38 in. x 70 in. display area

6 x 1 vertical (MB6200) with a 19 in. x 84 in. display area



 

  AVAILABLE OPTIONS
Screw jacks at four corners

Rear hitch adapter (2" ball)

75-amp heavy-duty portable battery charger (Fleet charger)

Built-in adapter for 75-amp charger (Fleet charger)

Built-in adapter for 55-amp charger (power supply, 120V)

Hinged door for accessory storage compartment

Additional options available